
Roof Windows & Velux Fitting in Sussex
Velux roof windows and flat roof lanterns, fitted new or as replacements by Royal Roofing Services.
- New Velux roof windows fitted
- Old or leaking roof windows replaced
- Roof lanterns on felt flat roofs
- 30+ years' experience
- Free quotes
- £5m public liability insured
- Local Worthing firm
Worthing based, Sussex wide
Velux roof window installation in Sussex
Royal Roofing Services fits Velux roof windows and roof lanterns across Sussex, as new windows and as replacements, during a re-roof or on a flat roof. We are based in Worthing.
A roof window is a hole in the roof with a frame in it, so the fitting matters more than the window. The flashing has to suit the tile or slate around it and the timber round the opening has to carry the load. Because we are roofers, that is the part we do every day. Call 07957 072703 or use the quote form for a free quote.
Roof windows and roof lanterns
Roof windows
Velux roof windows sit in the slope of a pitched roof and bring light into the room below. They open for ventilation, and most can be turned to clean the outside from indoors.
Roof lanterns
A lantern stands up from a flat roof on a kerb, with glass on all sides. It suits a kitchen or extension with a flat roof over it, and it is fitted as part of the roof covering. See flat roofing.
Can you replace an existing roof window?
Yes. Roof windows do not last for ever. Seals harden, the glazing unit mists between the panes, hinges stiffen and timber frames suffer if condensation has run down them for years. A worn window can also let in damp around the opening.
In most cases a new window of the same size drops into the existing opening, so the ceiling and plaster inside are barely touched. We take out the old window, fit the new one with a new flashing kit, and relay the tiles or slates around it.
If the leak is not the window itself, we trace it first. Water that shows at a roof window has often come from higher up the slope. See roof repairs.
Free quotes across Sussex
Get your roofing project started today
Tell us whether it is a new window, a replacement or a lantern, and what the roof is covered in.
Step by step
How a new roof window is fitted
Check the roof
We look at the rafters, the covering and where the window can go.
Strip the area
Tiles or slates and battens are lifted where the window will sit.
Form the opening
Rafters are cut and trimmed with new timber so the load is carried round the window.
Fit the frame
The frame is fixed, levelled and sealed to the underlay.
Flash it in
The flashing kit for that roof covering goes on, and the tiles or slates are relaid.
Finish
The sash is hung and tested, and the roof is left watertight.
The lining and plastering around the window inside is normally finished by your builder or decorator.
Why roof windows leak
A roof window that is fitted well should not leak. When one does, it is usually one of these.
The wrong flashing
Flashing kits are made for particular tiles and slates. The wrong one never seals.
Blocked channels
Leaves and moss fill the gutter round the frame and water backs up.
Tiles laid too tight
Tiles cut hard against the frame stop water draining away.
Perished seals
Old gaskets let wind-driven rain past the sash.
Condensation
Water on the inside of the glass that runs down and looks like a leak.
Damaged underlay
A tear above the window sends water onto the top of the frame.
Job story
A flat roof re-covered around a new rooflight
On this job the flat roof was stripped, new deck boards were fitted around the rooflight opening, and the felt was built up to the kerb so the light and the roof are sealed as one.
What a roof window adds
Daylight
Light from above reaches further into a room than light from a wall.
Ventilation
Warm, damp air leaves at the highest point of the room.
A usable loft room
Light and air without altering the outside walls.
A brighter extension
A lantern lifts a deep kitchen or dining room.
Privacy
Sky above, with no view in from next door.
Little change outside
A roof window sits close to the line of the roof.
What affects the price
What affects the price of a roof window
We do not publish prices. These decide the quote.
New or replacement
A replacement uses the existing opening. A new one means cutting rafters.
Size and type
Larger windows and special glazing cost more.
The roof covering
Slate and plain tiles take longer to work round than large tiles.
Access
Scaffolding or a tower, depending on height.
How many
Several windows on one visit cost less each.
With other work
Fitting during a re-roof or a new flat roof saves stripping twice.
Done properly
Roof windows done properly
Cutting a new opening in a roof is building work. These are sensible questions for any installer.
- Will the rafters be trimmed and doubled where they are cut?
- Is the flashing kit the right one for my tiles or slates?
- Does a new opening need Building Regulations approval, and who arranges it?
- Do I need planning permission? Usually not, but listed buildings, conservation areas and windows facing the road can differ.
- For a lantern, how high is the kerb above the finished roof?
- Who finishes the inside?
A new roof window in an existing house normally needs Building Regulations approval, because it changes the roof structure and has to meet energy and ventilation rules. Ask about it at the survey.
Our work
Recent roof window jobs
More photos are in the gallery.
Do you fit Velux windows?
Yes. We fit Velux roof windows ourselves.
Can a roof window be fitted without a new roof?
Yes, in many roofs. We check the roof first.
Why is my roof window leaking?
Usually the flashing or sealing around the frame, or a worn window. We find the cause and repair or replace it.
Do you fit roof lanterns?
Yes, on flat roofs.
Can you replace a roof window from another maker with a Velux?
Usually. Sizes differ between makers, so the opening may need adjusting. We measure it and tell you what is involved.
Can a roof window be fitted in a slate roof?
Yes. Slate needs its own flashing kit, which sits the window lower so the slates lap over it properly.
How long does it take to fit a roof window?
A straightforward replacement is usually short work. A new opening takes longer. We give you a timescale with the quote.
Will a roof window make the room too hot?
South-facing glass does gain heat. Blinds, and glazing made to cut solar gain, both help, and opening the window lets the heat out.
Why is there condensation on my roof window?
Warm, damp air meets cold glass. It is worse in kitchens, bathrooms and bedrooms. Using the trickle vent and airing the room usually sorts it.
Do you fit the window linings and plaster inside?
Our work is the roof side: the opening, the frame, the flashing and the tiles. Internal finishing is normally done by your builder or decorator.
Roof windows near you
We fit roof windows across the county. Chalet bungalows around Worthing and Eastbourne and Seaford rely on them for upstairs light. In Brighton & Hove, Chichester and Lewes, conservation areas mean it is worth checking the rules before adding a window to a front slope. Extensions around Horsham and Crawley are where most lanterns go.
Free quotes across Sussex
Get a free quote for roof window installation
Call us on 07957 072703 or use the quote form at the top of the page.


